Home automation kit for the automation of 5 electric rolling shutters at 230VAC. The modules inside the kit are programmed to allow installation without the use of SimpleProg programming software. It is possible to control each shutter through the local inputs of modules art. 20004606 and the general up and down control of all shutters from 2 inputs of module art. 20046501. The modules are set up for the management of the percentage position and for the command to a preferred position.
Kit components specifications:
2I2O Rolling shutter module:
Home automation module equipped with 2 inputs for the direct connection of 2 control buttons and 2 outputs electronically interlocked by the module with 2A electromechanical relays that can control 250VAC motors up to a maximum of 350W.
Suitable for the control of automated openings such as motors of awnings, rolling shutters or blinds. The module allows management of opening, closing, stopping and positioning at intermediate values of the motorisation connected to it.
Addressing via SimpleProg software.
Flush-mounting or DIN rail mounting
Dimensions 50x50x18.5mm (1 DIN module)
Absorption max. 16mA.
Power supply 20022101:
Dimensions: HxWxD 50x50x18.5mm
Home automation system compatible
DIN modules (No.) 1
Connectivity No. of Simplehome buses (No.) 1
Digital inputs (n°) 2
Max distance from digital input 25 meters
Relay output 2x2A@250VAC
Power supply from SimpleHome BUS
Maximum current consumption 16 (mA)
Maximum load as sum of the loads of the single outputs 350 mm
Number of digital inputs (n°) 2
Number of outputs (n°) 2
Output type Electromechanical relay
SIMPLEHOME module 5 digital inputs flush-mounted:
SimpleHome module equipped with 5 digital inputs (4 normal + 1 scenario) that can be used to connect up to 5 buttons in flush-mounted or wall-mounted boxes.
To be connected to the SimpleHome BUS
Digital inputs configurable via software nc/no
BUS address programming via dip-switches
Home automation system compatibility
perfetti come da descrizione, Comelit una garanzia