Thermostat for flush-mounting (in qualsaisi box of 3) Bticino colour Grey tech. The thermostat connected to the boiler or air-conditioning need to program the switching on and off and also the desired temperature.
NEW THERMOSTAT for HC4451 REPLACES The ARTICLE HC4449
CHRONO-ART. HC4451 MODEL FOR LIGHT KEYS HC
attention is not included in the price of the plaque shown in the photo.
TRADITIONAL SETTING OF THE TEMPERATURE IN THE APARTMENT The new thermostat for flush-mounting is characterized by the maximum ease of use, thanks to the backlit display and only 6 buttons that allow you to perform all the functions required during daily use. Through the menu, the programming is simplified cated and extremely intuitive. The power supply is a battery so as to allow the extraction of the thermostat, and then to be able to conveniently program. The chrono-thermostat can be activated remotely and is particularly useful for this purpose, the new actuator GSM telephone art. F462 that, through a simple SMS, you can turn on and turn off their heating system. The thermostat is also connectable to the external probe art. 3457 to carry out three different functions:
displayed directly on the thermostat for the outdoor temperature;
measure the temperature of the environment in a better place than the one in which you installed the programmable thermostat;
set a threshold limit for floor heating systems.
Operating temperature: 5°C ÷ 35°C
Power supply: 2 alkaline batteries 1.5 V type LR6/AA
Minimum time between an intervention and the other 15 minutes
Temperature values can be set: 3°C ÷ 40°C
Recessed installation – 3 modules
Flow rate output contacts voltage-free: 5(3)To
Possibility of connection of the external probe art. 3457
Possibility of remote activation through the telephone switchboard, the actuator phone, burglar alarm system etc