HILTRON CENTRAL ANTI-THEFT PROTEC4
HILTRON CENTRAL ANTI-THEFT PROTEC4
Series Protec Wired
The pleasant design, and the optimization of its phases of installation thanks to the complete opening of the container, in ABS , to make the series PROTEC the right choice for achieving anti-theft system within the living environment.
Arm/disarm the system through mechanical key integrated on the panel or with optional control
Antiopening protection Tamper
Choking plant and exclusion zones using buttons
Autoinibizione of each area, if not restored, after generating an alarm
Conforms to the 1st level of the standard CEI79-2
LED of presence control, network,time of exit,alarm state,status, zones,alarm memory,was the fuse services
Protection zones immediate 2
Protection areas delayed 1
Areas of protection antisabotage "24h" 1
Supply voltage 230V~ ±5% 50Hz
Rated service output 12vdc ±10%
Normal absorption 40mA
Maximum power consumption 140mA
The maximum absorption of the single central 35mA
Maximum current from the power supply 1A (AL5)
Maximum current output sirens 3A (with battery connected)
Maximum current in service output 650mA
Power supply / charger AL5 (included)
Buffer battery 12V 7.5 Ah (not included)
Alarm duration adjustable 180 ÷ 600sec.
Degree of protection of the container IP30
Fuse on the primary of the transformer 250mA L 250V type F
Fuse on the secondary of the transformer 2A L 250V type F
Fuse output sirens 3.15 A L 250V type F
Fuse output power services, 1A type F
Outputs activation siren Ext/Int,positive, present, with the system inserted
Output time adjustable 4 ÷ 75sec.
Entry time adjustable 4 ÷ 75sec.
The outer container ABS
Operating temperature +5°C ÷ +40°C
Dimensions (L) 280mm
Dimensions (h) 230mm
Dimensions (d) 96mm
Weight : 2 Kg
Data sheet
- Type
- Central
- System
- With Wires
Specific References